The titanium alloy TC4 material composition is Ti-6Al-4V, which belongs to the (α+β) type titanium alloy and has excellent comprehensive mechanical properties. Greater specific strength. The strength of TC4 sb=1.012GPa, the density g=4.51g/cm3, the particular strength sb/g=23.5, and the particular strength sb/g of alloy steel is less than 18. Titanium alloy has low thermal conductivity. The thermal conductivity of the titanium alloy is 1/5 that of iron and 1/10 that of aluminum. The thermal conductivity of TC4 is l=7.955W/m·K.
Coefficient of linear expansion=8.6*10-6℃(0-100℃), specific heat=0.612j/g·℃. The modulu of elasticity of titanium alloy is low. The modulus of elasticity of TC4 is E=110GPa, which is about 1/2 of steel, so it is easy to deform when titanium alloy is processed. Its Poisson's ratio is 0.34. The surface modification of TC4 (Ti-6Al-4V) and TA7 (Ti-5Al-2.5Sn) titanium alloys adopts two implantation schemes. Tests show that after ion implantation of titanium alloys, the microhardness is increased and significantly reduced. The sliding friction coefficient is improved, and the wear resistance is effectively improved. To explore the modification mechanism, X-ray photoelectron spectroscopy (XPS) analysis was performed on the injected and uninjected samples, and satisfactory results were obtained.
TC4 titanium alloy is one of the most widely used titanium alloys. It has high strength and excellent corrosion resistance, but it is challenging to see seamless titanium tubes made of TC4 in the transparent titanium tube market at home and abroad. TC4 titanium material is mainly plate material, and TC4 pipe material on the market is primarily a high-strength thick-walled pipe produced by hot extrusion or oblique perforation.
The main reason for this situation is the high strength of TC4 titanium alloy and the difficulty of cold rolling forming. To solve the critical technology of TC4 seamless tube cold-rolling forming, a series of researches were carried out jointly by schools and enterprises. For example, the direct cold-rolling forming process produces high-strength titanium alloy pipes, which not only dramatically reduce the production cost but also meets the requirements for high-performance titanium alloy applications.
TRUNNANO (aka. Luoyang Kmpass Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years' experience in providing super high-quality chemicals and Nanomaterials. The 3D printing TC4 powder produced by our company has high purity, excellent particle size and impurity content. Lower, please contact us if necessary.
