Characteristics and Application of 3D Metal Printing Powder Inconel625 Powder

(Characteristics and Application of 3D Metal Printing Powder Inconel625 Powder)

Inconel625 is an alloy grade with a density of 8.4 g/cm3 and melting point of
1290-1350 degree. It has the excellent resistance to inorganic acid corrosion
and has excellent corrosion resistance to various corrosive media in oxidation
and reduction environments.

Inconel625 alloy powder shows the excellent corrosion resistance in many
media. It has the excellent resistance to pitting, crevice corrosion,
intergranular corrosion, and erosion in chloride media.

This In625 alloy powder has the following features:

1. It has the excellent corrosion resistance to various corrosive media in
oxidation and the reduction environments

2. Excellent resistance to pitting corrosions and crevice corrosion, and will
not produce stress corrosion cracking caused by the chloride

3. Excellent resistance to inorganic acid corrosions, such as nitric acid,
phosphoric acids, sulfuric acids, hydrochloric acids, and mixed acid of sulfuric
acid and hydrochloric acids, and so on.

4. Excellent resistance to corrosion of various inorganic acids composite
solution.

5. When the temperature reaches 40degree, it can show good corrosion
resistance in different concentrations of hydrochloric acid solution

6. Good processability and weldability, no cracking sensitivity after
welding

7. Manufacture certification of the pressure vessels with wall temperature of
-196～450℃

Inconel 625 powder application range application areas are:

The softened and annealed low-carbon alloy 625 powder is widely used in the
chemical process industry. Its good corrosion resistance and the high strength
enable it to be used as a thinner structural component. Alloy 625 can be used in
situations exposed to seawater and subjected to high mechanical stress. Typical
application areas:

1. Features of organic chemical processes containing chlorides, mainly where
acid chloride catalysts are used

2. Used in the manufacture of the digesters and bleaching tanks in the pulp
and paper industry

3. Absorption tower, reheater, flue gas inlet baffle, fan (humidity),
stirrer, baffle and flue in the flue gas desulfurization systems.

4. Used to manufacture equipments and components used in acid gas
environments

5. Acetic acid and acetic anhydride reaction generator

6. Sulfuric acid condenser

TRUNNANO (aka. Luoyang 3dprintingpassion Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years’ experience in providing super high quality chemicals and Nano materials. The 3D printing metal powder produced by our company has high purity, fine particle size and impurity content. Lower, please contact us if necessary.

(Characteristics and Application of 3D Metal Printing Powder Inconel625 Powder)