Preparation Process of Spherical Metal Powder for 3D Printing


3fe026d138ecc0aa69994d57687acd45-2

(Preparation Process of Spherical Metal Powder for 3D Printing)

What is Spherical metal powder?

Spherical metal powder is the core material of metal 3D printing and the most
important link in the 3D printing industry chain, which is closely related to
the development of 3D printing technology. It is a metal powder with a size of
less than 1 mm. In addition, the metal is required to meet the requirements of
high purity, good sphericity, narrow particle size distribution, low oxygen
content, and good fluidity. At present, metal powder materials for 3D printing
are mainly concentrated in metals and their alloys such as iron, titanium,
cobalt, copper, and nickel.

With the rapid development of metal 3D printing technology, the market for
spherical metal powders will maintain a high growth trend. The market size of 3D
printing metal powder in 2016 was approximately US$250 million. According to
IDTechEx, the market size of 3D printing metal powder will reach US$5 billion by
2025. It is particularly important to study the preparation of metal powder for
3D printing. This article describes the basic principles of the main preparation
process of metal powder for 3D printing, and analyzes its advantages and
disadvantages. The purpose is to further improve the level of preparation
technology of metal powder for 3D printing and promote The development and
application of 3D printing technology.

The powder produced by the atomization method has accounted for more than 80%
of the metal 3D printing powder in the world today. The principle is that the
fast-moving fluid (atomization medium) impacts or otherwise breaks the metal or
alloy stream into fine droplets. It is a powder preparation method that
condenses into a solid powder. The principle of gas atomization is the process
of pulverizing a liquid metal stream into droplets through a high-speed airflow
and quickly condensing it into powder. The metal powder prepared by gas
atomization has the advantages of fine particle size, high sphericity, and high
purity. It is currently the main method for producing metal powder for 3D
printing. The 3D printing powder metal prepared by it accounts for about 40% of
the powder prepared by the atomization method. However, the gas atomization
technology also has certain shortcomings. In the process of airflow crushing the
metal liquid, the airflow energy is low, and the atomization efficiency is low,
which increases the metal powder preparation cost.

The spheroidization method is mainly to spheroidize the irregular powder
produced by the crushing method and the physical and chemical method. It is
considered to be the most effective process for obtaining high-density spherical
powder. The principle is to use a heat source with high temperature and high
energy density ( Plasma), the powder particles are rapidly heated and melted,
and condensed into spherical droplets under the action of their surface tension.
After entering the cooling chamber, they are rapidly cooled to obtain spherical
powder. At present, the preparation process of spheroidization is mainly divided
into radio frequency ion spheroidization and laser spheroidization. Because the
initial powder will produce a certain agglomeration phenomenon, it will melt as
a whole during the spheroidization process, resulting in an increase in the
particle size of the prepared spherical metal powder.

About 3dprintingpassion:

3dprintingpassion is a trusted global chemical material supplier & manufacturer with
over 12 years experience in providing super high-quality chemicals and
Nanomaterials. The company export to many countries, such as USA, Canada,
Europe, UAE, South Africa, Tanzania,
Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech
Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand,
Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a
leading nanotechnology development manufacturer, 3dprintingpassion dominates the market.
Our professional work team provides perfect solutions to help improve the
efficiency of various industries, create value, and easily cope with various
challenges. If you are looking for Spherical metal powder, please send an email to:
sales2@nanotrun.com


0e55cdc1b8b459ee117e8c60c76de204

(Preparation Process of Spherical Metal Powder for 3D Printing)

Contact Form

Newsletter Updates

Enter your email address below and subscribe to our newsletter