Properties and Uses of 3D Metal Printing Powder Aluminum-based AlSi10Mg Powder

(Properties and Uses of 3D Metal Printing Powder Aluminum-based AlSi10Mg Powder)

AlSi10Mg is a cast aluminum alloy. Cast aluminum alloy has good
manufacturability, low density, and good corrosion resistance, so its castings
are widely used in aviation, instrumentation, and general machinery, such as the
automobile engine and Air manifold's cylinder head, piston, wheel hub, steering
booster housing, etc.

Casting aluminum alloy is an aluminum alloy filled with molten metal to
obtain various parts. It has the advantages of low density, high specific
strength, good corrosion resistance and casting processability, and less
restricted by the structural design of components. It is divided into Al-Si and
Al-Si-Mg-Cu-based medium-strength alloys; Al-Cu-based high-strength alloys;
Al-Mg-based corrosion-resistant alloys; Al-Re-based thermal strength alloys.
Most of them need heat treatment to strengthen the alloy powder, eliminating the
internal stress of the casting, stabilizing the structure and the size of the
parts. It is used to manufacture beams, gas turbine blades, pump bodies, pylons,
hubs, intake lips and engine casings. It is also used in manufacture automobile
cylinder heads, gearboxes and pistons, instrument housings, and turbocharger
pump bodies.

The casting process directly obtains the aluminum alloy used for the critical
parts. It must have ideal castability: good fluidity, small shrinkage, hot
cracking and cold cracking tendency, little segregation and gas absorption. The
cast aluminum alloy's element content is generally higher than that of
corresponding deformed aluminum alloy, and most alloys are close to eutectic
composition. Besides, a research institution also proposed a sustainable,
intelligent additive manufacturing technology driven by big data analysis. It
used SLM technology to manufacture AlSi10Mg aluminum alloy pump impellers in
additive manufacturing companies to verify it.

In the past ten years, additive manufacturing (AM, 3D printing) has been very
rapid. The advantages of reducing the waste of materials and resources and
eliminating the need for special tooling have been achieved in energy-saving and
clean energy—every potential application. Finally, an application scheme in the
additive manufacturing process is proposed to verify the proposed framework's
effectiveness. The proposed framework is used in the initial design phase of the
product life cycle. This is because the resources available for reference are
minimal. An example of using AM technology to manufacture AlSi10Mg aluminum
alloy parts is to demonstrate the correctness of this framework. Sex. The
results show that the product's energy consumption and the quality of the work
can be fully controlled, which is beneficial to intelligent and sustainable
additive manufacturing, reducing emissions, and achieving cleaner
production.

TRUNNANO (aka. Luoyang 3dprintingpassion Nano Technology Co. Ltd.) is a trusted global
chemical material supplier & manufacturer with over 12 years' experience in
providing super high-quality chemicals and Nanomaterials. The 3D printing metal
powder AlSi10Mg powder produced by our company has high purity, fine particle
size and impurity content. Lower, please contact us if necessary.

(Properties and Uses of 3D Metal Printing Powder Aluminum-based AlSi10Mg Powder)