(How To Remove Pla Support Material From 3d Print)
Here are some ways to do it without using any traditional tool or software: 1. Carefully Sand Off: Using a circular saw orpaper, carefully sand off the pla support material from the 3D printer. 2. Use a Miter Saw: A miter saw can be used to cut through the pla support material without damaging the part. Cut through the support material using a straightedge and hold the piece in place until it is complete. 3. Use a Wrench: A wrench can be used to torque the pla support material away from the 3D printer. 4. Use a Watching Hand: Using a watching hand, you can gently pull on the pla support material to help it come loose. 5. Use a Extractor: An extractor can be used to remove the pla support material by cutting through the material at an angle using a specific type of blade.
(How To Remove Pla Support Material From 3d Print)
By following these steps, you should be able to safely remove the pla support material from your 3D print without causing any damage to the part. It's important to note that when removing a pla support material, always wear protective gear such as gloves and safety glasses to prevent injury. Additionally, always follow proper procedures and never use sharp tools or machinery that could cause injuries.
